|
STANLEY HYDRAULIC POWER TOOLS |
"Municipal Utility Dealer for Oklahoma, Arkansas, North Louisiana"
|
|
|
BACK |
  |
|
ICM IS A STANLEY HYDRAULIC TOOL DISTRIBUTOR IN A
LIMITED TERRITORY. THE
"Municipal
Utility Dealer for Oklahoma, Arkansas, North Louisiana" |
|
Stanley Hydraulic Power Units |
|
G18 Power Units |
 |
|
HPR Power Units |
 |
|
HV18 Converter |
 |
|
Stanley Hydraulic Breakers |
|
Stanley Hydraulic Breakers
Stanley
offers the most extensive line of hydraulic breakers in the world. With
over 40 models to choose from, Stanley has a breaker for light to heavy
concrete demolition, asphalt cutting, post driving, ground rod driving,
or hard packed earth digging.
Stanley
breakers feature diaphragm accumulators for added punch and a feathering
valve for easy start-up.
Many
models feature Easi-Ride feet or anti-vibration handles for added
operator comfort.
Click here for Chart
|
 |
|
Stanley Hydraulic Cut Off Saws & Grinders |
|
Stanley Hydraulic Cut off Saw
The Stanley
CO25 Cut-Off Saw is used for metal or concrete cutting. The CO25 uses
standard 14 inch (355.6 mm) abrasive or wet or dry diamond blades. It
comes standard with an internal blade brake and water attachment
porting. Stanley CO25 features are:
7-9 gpm
(26-34 lpm) operating range.
4-3/4 inch (120.6 mm) deep maximum cut.
Adjustable wheel guard.
HYREVZ gear-type motor.
Flow regulator to prevent overspeed.
Safety trigger.
|
 |
|
Stanley Hydraulic Cut off Saw
The Stanley
CO23 Cut-Off Saw was designed for underwater use but it is also a very
useful tool on land as well. The CO23 uses standard 10 inch (25.4 cm)
diameter abrasive or wet or dry diamond blades for cutting metals or
concrete. Stanley CO23 features are:
10-15
gpm (38-57 lpm) operating range.
Adjustable depth shoe plate.
3 inch (76.2 mm) deep maximum cut.
Wheel guard.
Integral HYREVZ gear-type motor.
Safety trigger.
|
 |
|
Stanley Hydraulic Grinder
The Stanley
GR30 Grinder is used for top, face, and side grinding using 9 inch
(228.6 mm) diameter wheels. Wire brushes can also be used and
depressed-center wheels with an optional adapter. Stanley GR30 features
are:
7-9 gpm
(26-34 lpm) operating range.
5600 rpm @ 8 gpm (30 lpm)
Adjustable wheel guard.
Integral HYREVZ gear-type motor.
Assist handle
Reverse-Check Valve
Motor run-down
Dual-Spool for operation on OC or CC systems
Plastisol/foam handle
Speed limiter
Whip hoses and couplers
|
 |
|
Stanley Hydraulic Cupstone Grinder
The Stanley GR60 Cupstone Grinder is used for shaping and smoothing
profiles using 6 inch (152.4 mm) cup wheels. Stanley GR60 features are:
10 gpm
(38 lpm) operating flow.
Integral shaft lock.
Interlocking safety trigger.
HYREVZ gear-type motor.
HTMA quick disconnect couplers.
Single latch guard height adjustment.
|
 |
|
The Stanley
HG80 Horizontal Grinder is used for surface touch-up of welds and
de-burring using 8 inch (203 mm) wheels. Stanley HG80 features are:
8-10 gpm
(30-38 lpm) operating range.
Interlocking safety trigger.
HYREVZ gear-type motor.
HTMA quick disconnect couplers.
|
 |
|
Stanley Hydraulic Bull
Nose Grinder
The Stanley HG60 Bull-Nose Grinder is used for de-burring holes and
grinding inside corners and curves. Stanley HG60 features are:
5-10 gpm
(19-38 lpm) operating range.
Interlocking safety trigger.
HYREVZ gear-type motor.
HTMA quick disconnect couplers.
|
 |
|
Stanley Hydraulic Drills |
| Stanley
Hydraulic Hand Held Core Drill
The Stanley
CD10 Core Drill is used for drilling 5/8 in. to 6-3/8 in. (15 mm to 160
mm) diameter holes in concrete, masonry, or asphalt materials using
carbide or diamond segmented bits and water lubrication. Stanley CD10
features are:
5.8-13
gpm (22-50 lpm) operating range.
3 speeds, 380, 900, and 1800 rpm.
Gardena quick connect water connection coupler.
HTMA quick disconnect couplers.
Drilling aid for freehand drilling assistance.
1/2 x 5/8-11 in. thread adapter included.
|
 |
|
Stanley Hydraulic Core Drill
The Stanley
CD12 Core Drill is used for drilling 5/8 in. to 12 in. (15 mm to 300 mm)
or (5/8 in. to 14 in./15 mm to 356 mm) diameter holes in concrete,
masonry, or asphalt materials using carbide or diamond segmented bits
and water lubrication. Stanley CD12 features are:
4-6 gpm
(15-23 lpm) operating range.
3 speeds, 380, 900, and 1800 rpm.
Gardena quick connect water connection coupler.
HTMA quick disconnect couplers.
Drilling aid for freehand drilling assistance.
Anchor stand, adjustable from 90ฐ to 45ฐ.
1-1/4 UNC male, 1/2 UNC female spindle connection.
1/2 x 5/8-11 in. thread adapter included.
|
 |
|
Stanley Hydraulic Diamond Chain Saws |
| Stanley
Hydraulic Chain Saws
The Stanley
DS06 Diamond Chain Saw is used for fast cutting of concrete, reinforced
concrete, conduit, brick and other masonry. Plunge cutting and square
corner cutting is not a problem. Stanley DS06 features are:
4-6 or
7-9 gpm (15-23 or 26-34 lpm) operating range.
13 inch bar capacity.
Water lubrication cooling.
11.5 inch cutting depth.
HTMA quick disconnect couplers included on all models.
Wallwalkerฎ included.
|
 |
|
Stanley Hydraulic Impact Wrenches |
| Stanley
Hydraulic Impact Wrenches
The Stanley
ID07 Impact Wrench develops up to 500 foot pounds (675 Nm) of impact
torque making it an ideal tool for drilling holes from 1/2 to 1-1/16
inch diameter, 18 inches in length and working with fasteners of the
same size diameters. Stanley ID07 features are:
4-12 gpm
(15-45 lpm) operating range.
Dual Spool for O.C. or C.C. hydraulic systems.
Detent type forward/reverse spool.
Reverse check valve to prevent incorrect connection.
Integral HYREVZ gear-type motor.
Large trigger for gloved operation.
Swing hammer mechanism.
|
 |
|
Stanley Hydraulic Chippers & Diggers |
Stanley
Hydraulic Chipping Hammer
The
Stanley DR19 Digger is designed for digging in heavy clay, light shale, or
hard-packed earth. The DR19 features:
Shock
and heat insulated body.
Spring-loaded latch.
Accepts standard 7/8 inch hex tool bits.
Feathering ON/OFF valve.
Optional assist handle.
Hose whips.
|
 |
|
Stanley Hydraulic Chipping Hammer
Weighing in
at only 16 pounds (7.25 kg), the Stanley CH15 Chipping Hammer is ideal
for light demolition such as curbing or vault work. The CH 15 features:
Shock
and heat insulated body.
Floating trigger for easy engagement.
Accepts .580 inch hex shank, oval collar tool steels
HTMA quick disconnect couplers standard.
Available for 5 gpm (19 lpm) or 8 gpm (30 lpm).
Underwater model available.
|
 |
|
Stanley Hydraulic Earth Auger - Hydraulic
Ground Rod Driver - Hydraulic Post Driver & Pullers |
|
Stanley Hydraulic Earth Auger
The Stanley
EA08 Earth Auger is used for a wide variety of earth boring application.
The EA08 can be operated with two people or by one person using the
torque tube. Stanley EA08 features are:
7-9 gpm
(26-34 lpm) operating range.
Output torque 250 ft. lb. / 339 Nm
Reversible.
HTMA quick disconnect couplers.
Torque tube for one-man operation.
Dead-man type ON/OFF control
|
 |
|
Stanley Hydraulic Ground Rod Driver
The Stanley
GD50 Ground Rod Drivers drive 1/2 to 1 inch rod from the top of the rod.
A valve, in-line on the hoses, permits control of the GD50 while it is
slung to the top of the rod. Stanley GD50 features are:
5-9 gpm
(19-34 lpm) operating range.
In-line valve on hoses for ON/OFF control.
Assist handles.
Lifting eye.
HTMA quick disconnect couplers.
|
 |
|
Stanley Hydraulic Post Driver
The Stanley
PD45 Post Driver will drive #2, #3, & #4 lb/ft "U" channel, #3 & #4
Strong Back "U" channel, #1 delineator, up to 2-5/8 inch round, or up to
2-1/2 inch square posts. Stanley PD45 features are:
7-9 gpm
(26-34 lpm) operating flow.
Lifting eye.
ON/OFF trigger next to guide handle (model dependent).
Hose whips.
Nitrogen charged accumulator.
Guide handles.
|
 |
|
Stanley Hydraulic Post Puller
The Stanley
PP10 Post Puller is the ideal tool for pulling any type of post up to 8
inches wide. Stanley PP10 features are:
3-9 gpm
(11-34 lpm) operating range.
9800 lb pulling force.
Carrying handle.
UP/NEUTRAL/DOWN control valve.
Built-in grips for "U" channel posts.
Chain & pins for irregular & perforated posts.
|
 |
|
Stanley Hydraulic |
|
|
|
|
Stanley Hydraulic Breakers Chart |
|
|
